Creasoft Acces has 2 components, an electronic access control device and a software hosted in the access configuration and reporting cloud, based on RFID card authentication, fingerprint or access code.
The electronic device produced by us controls access in both directions through 2 proximity RFID readers and/or fingerprint readers, with event reporting via the Wi-Fi/GSM network in the Creasoft Access software application.
The RFID card has a specialized integrated circuit, which is fed from the electromagnetic field created by the reader (at a distance of less than 10 cm) and automatically emits a programmed code in the non-volatile memory. Based on the code (serial number) read from the presented card, the person passing the door is identified.
Technical Specifications of the local Creasoft Acces
- unit: Power Supply: 12V DC +5%;
- Rated current VV with proximity reader 101mA&13.8V;
- Rated current VV with both readers 126 mA&13.8V;
- Serial interface;
- MINI USB output;
- RJ12 output;
- Size: 80 x 38 mm;
- Mass: 106g;
Interface with anti-theft / fire protection system
The Creasoft Acces device is also provided with a digital input called AUX_DIN/DOUT for interfacing with the anti-theft and fire-fighting systems. The AUX_DIN/DOUT input is triggered by grounding (0V). If a panic or fire alarm status is generated either from the keypad of the anti-burglary alarm system, or the smoke sensors found in the enclosure, a programmed exit of the anti-burglary alarm system must ground this AUX_DIN/DOUT signal, moment when the Creasoft Access device will enable the relay control output to open the door unconditionally. The door will remain open until the signal disappears (the AUX_DIN / DOUT signal is no longer held at zero potential).
